 |
 |
 |
Single Wing
using
AM123 XXLge Set of Wings (1)
Magic Meltz was poured in the mould to cast it. A hole was pierced in the wing
while the MM was still quite warm. Silver wire was then wrapped around the wing. |
Leaf Tag
using
AM186 XXLge - Tag Rectangular (Large)
AM was partially filled with Magic Meltz, leaf was placed in the mould which was
then topped off with more clear Magic Meltz.
Hole
was made while cast was still hot.
|
Oval Wired Pendant
using
AM190 XLge - Shape Oval (Lge)
AM was partially filled with Magic Meltz, wire mesh was placed in the mould
which was then topped off with more clear Magic Meltz.
Hole was made while cast was still hot.
|
 |
 |
 |
Silver Bamboo on Purple
using
AM189 XLge - Shape Pendant (Large)
Ink stamp with silver pigment ink. Leave stamp on inkpad to keep it moist. Pour
Magic Meltz into the art mould, then press the stamp into the back of the cast
(surface which is facing you) while the MM is still hot. Leave stamp on the AM
for a few seconds, then carefully peel off.
Hole was made while cast was still hot.
|
Red and Gold
using
AM189 XLge - Shape Pendant (Large)
Mould was cast with Magic Meltz. Hole was made while cast was still hot.
Wire was then coiled around the piece, and through the hole.
|
Pendant with Coiled Wire Inclusions
using
AM189 XLge - Shape Pendant (Large)
AM was partially filled with Magic Meltz, coiled wire was placed in the mould
which was then topped off with more Magic Meltz.
Hole
was made while cast was still hot.
|
 |
 |
 |
Domino Bracelet
using
AM212 XLge Domino (Large)
AM217 Med Domino (Small)
Ink stamp with silver pigment ink. Leave stamp on inkpad to keep it moist. Pour
Magic Meltz into the art mould, then press the stamp into the back of the cast
(surface which is facing you) while the MM is still hot. Leave stamp on the AM
for a few seconds, then carefully peel off.
Eye pins were inserted into the pieces while they were still very warm.
|
Clear Bracelet
using
AM213 Lge Check It Shape
AM217 Med Domino (Small)
Ashleigh coiled wire pieces - Navy Blue - ready to place onto half poured AMs
then topped up AMs with more Magic Meltz. The links were then joined to form a
bracelet.
|
Bracelet
using
AM217 Med Domino (Small)
Moulds were cast with Magic Meltz, eye pins were inserted into the pieces while
they were still very warm.
Once cooled down, the piece were wrapped in wire, and linked together.
|
 |
 |
 |
Leafy Bolo
using
AM215 XLge Bolo Curved Top
AM was partially filled with Magic Meltz, leaf was placed in the mould which was
then topped off with dark blue Magic Meltz.
Hole
was made while cast was still hot.
|
Bamboo Bolo
using
AM215 XLge Bolo Curved Top
Ink
stamp with gold pigment ink. Leave stamp on inkpad to keep it moist. Pour Magic
Meltz into the art mould, then press the stamp into the back of the cast
(surface which is facing you) while the MM is still hot. Leave stamp on the AM
for a few seconds, then carefully peel off.
Wire was inserted into the cast while it was still very warm.
|
Purple Bolo
using
AM215 XLge Bolo Curved Top
Magic Meltz poured into the Art Mould©.
Holes were made while cast was still very warm.
Wire was then coiled around the bolo and through the holes. |
 |
 |
Marbled Torso, front and back
using
AMMT Set XXLge Mini Torso Set
Both pieces of this mould
were secured with elastic bands. Magic Meltz was poured in the opening, and left
to set. When the MM was cooled, the cast was ready to be wrapped with some gold
wire.
|
Dark Beauty
using
AMMT XLge Mini Female Torso (Front Only)
Magic Meltz was poured into the torso shape, when cooled down gold wire was
coiled then wrapped around the torso.
|
 |
| |
Spread your Wings!
using
AM123 XXLge Set of Wings (1)
AMMT Set XXLge Mini Torso Set
Gold glitter was poured in the moulds, then Magic Meltz was poured on top.
Wire work was then added.
|
|
